Kitspace

Kitspace is a place to share ready-to-order electronics designs. We automate parts purchasing so you can focus on building.

github.com / nerdyscout

IR-MQTT Bridge with NodeMCU_ESP8266

github.com / BeeHive-org

an adaptor board to connect JST-XH plugs to Grove system plugs

github.com / julbouln

multi protocol interface tool

odour-stimulator

github.com / Sussex-Neuroscience

A fast, time precise open source system to deliver odours.

github.com / matiasandina

A raspberry pi shield and software to communicate with FED devices

github.com / robotsrulz

Logitech G25/G27 shifter/pedals adapter to use as standalone device

github.com / Ottercast

OtterCastAmp is an open-source WiFi Speaker amplifier, based on a Sochip S3 SoC. Powe...

github.com / Ryzee119

OpenXenium - Open Source Xenium Modchip CPLD replacement project for the Original Xbo...

dropbot-control-board.kicad

github.com / sci-bots

Control board for the DropBot v3 digital microfluidics platform

github.com / eulerlab

A board for integrating signals from a lightcrafter to a 2P microscope, part of the O...

github.com / rosmo-robot

Hardware & Firmware for BBC Micro:bit sumo bot

github.com / kanflo

An AA sized ISM radio Arduino clone

OtterCastAudioV2

github.com / Ottercast

OtterCast is an open-source audio streaming device running Linux. Based on a Sochip S...

github.com / eez-open

BB3 DCP405 module (Crowd Supply edition)

github.com / kelu124

High-speed pHAT

MicroFC-SiPM-Array-Board

github.com / OpenGammaProject

Carrier board for a 2x2 array of 6 mm C-Series MicroFC-60035 silicon photomultipliers...

github.com / MaxZimmer

<Spikeling v2.0 an artificial neuron for neuroscience enthusiasts!>

git.defproc.co.uk / DefProc

A conditioning circuit for using a piezo as an impact sensor for foam darts

github.com / emard

PCB for ULX3S FPGA R&D board

electron-detector

github.com / ozel

Low-cost DIY particle detector for radioactivity: Electron-detector variant

mosfet_circuit_plus_voltage_regulator

github.com / eulerlab

A variable voltage regulator and mosfet board for fast switching leds on/off, part of...

github.com / ollyoid

An artistic capacitive MIDI USB controller

d20-control-panel-2x1

github.com / gregdavill

2,400 LED Icosahedron (d20) - Controller Board 2x1 Panel

push-on-hold-off

github.com / kasbah

Simple power switch using a push button. Push to turn on, hold to turn off.

github.com / BeeHive-org

A board to control high powered leds

24_LED_Channels

github.com / BadenLab

24 LED channels option board for the LED Zappelin' project

github.com / squaresolid

Circuit for FISHING!

solarbird_shenzen_rdy

github.com / sgmk

Solar power circuit making sound

github.com / eez-open

BB3 AUX-PS board

github.com / kasbah

A simple oscillator in the shape of a mole

dropbot-120-channel-test-board.kicad

github.com / sci-bots

Test board for the DropBot v3 digital microfluidics platform

Open-Book-Abridged

github.com / joeycastillo

A simple, open hardware device for reading that anyone can build for themselves

fast-response-diode

github.com / amchagas

a fast response diode circuit to measure light changes down to hundreds of microsecon...

github.com / hutscape

🌳 Outdoor LoRa-GPS tracker with E-Ink display 🔑

ESP8266_DS18B20

github.com / alpharesearch

ESP8266 temperature collecting from DS18B20 sending it to IFTTT

github.com / kitspace-forks

HackAday Cortex Kit

rrf_rpi_skr_adapter

gitlab.com / salfter

Raspberry Pi to SKR/SKR Pro Adapter for ReprapFirmware

github.com / morgulbrut

bbq10kbd_breakout

github.com / arturo182

A very simple board breaking out the Q10 keyboard connector.

github.com / kimitobo

Board modification of 8Bitmixtape NEO synthesizer

github.com / GlasgowEmbedded

Glasgow Debug Tool Revision C1

github.com / rbaron

🌱💧 An open source soil moisture sensor.

github.com / LincolnUehara

Portrait-like PCB with constellation blinking randomically

teensy-audio-fx

github.com / mattvenn

Playable effects modeled on the Teenage Engineering Pocket operator series. Featuring...

stacklight-hardware

github.com / Tyler-Ward

The POE stack light is a network controlled status indication light that is powered o...

sangaboard_v0.4

gitlab.com / bath_open_instrumentation_group

An Arduino-compatible motor driver board and Pi hat for three unipolar stepper motors...

Unagi_Gar-Lampli

github.com / GenericLab

based on this new attiny bootloader and a minimal board to check / follow a fermentat...

ofm_cc_illumination_panel

gitlab.com / openflexure

Constant current illumination board for the Openflexure Microscope (panel).

backplane16pcie

gitlab.com / salfter

modular 4-slot backplane with reset and USB-C power

68b50-dual-serial

gitlab.com / salfter

dual 68B50 serial card

dropbot-front-panel.kicad

github.com / sci-bots

Front panel board for the DropBot v3 digital microfluidics platform

github.com / eez-open

BB3 DCM220 module

github.com / bschwind

linux-penguin-PCB-badge

github.com / Chromico

A linux PCB badge based on the linux penguin. There is no circuitry, just the PCB art...

easy-pdk-programmer-hardware

github.com / free-pdk

Easy PDK programmer for PADAUK microcontroller. EDA, schematic, gerber, bom, housing ...

github.com / BadenLab

4 LED channels option board for the LED Zappelin' project

github.com / Sussex-Neuroscience

A simple OpAmp circuit to combine voltage signals coming from different Thorlabs PM21...

github.com / bru4bas

Arduino with iCE40 FPGA

MicroFC-SiPM-Carrier-Board

github.com / OpenGammaProject

Carrier board for a 6 mm C-Series MicroFC-60035 silicon photomultiplier designed for ...

Pyr0-Piezo Z-Probe Standalone Module

github.com / pyr0ball

Standalone Pyr0-Piezo Circuit for using external arduino.

teensy-3.2-clone.kicad

github.com / sci-bots

KiCad conversion of https://github.com/thewknd/teensy-boards

github.com / intergalaktik

PCB for ULX4M FPGA R&D board

github.com / maltman23

==> ARDUTOUCH KITS ARE AVAILABLE at CornfieldElectronics.com <== ArduTouch is an Ard...

dropbot-120-channel-pogo-pin-board.kicad

github.com / sci-bots

Pogo-pin connector board for the DropBot v3 digital microfluidics platform

RB3200-ESP32universal

github.com / RoboticsBrno

rrf_rpi_skr_adapter_panel

gitlab.com / salfter

Raspberry Pi to SKR/SKR Pro Adapter for ReprapFirmware (panel)

github.com / dtomcat

Original Xbox EEPROM reader and writer. Based on and inspired by the awesome work by ...

github.com / eez-open

BB3 backplane module

github.com / im-tomu

A tiny ARM microprocessor which fits in your USB port.

openflexure_nano_motor_controller

github.com / rwb27

A very basic Arduino Nano based unipolar motor controller.

gitlab.com / erigas

Gnukey is a hardware security token that can be used as a GnuPG or U2F token.

Pyr0-Piezo Z-Probe Business Card DIY Module

github.com / pyr0ball

Business Card Sized Pyr0-Piezo Circuit using TH Components.

github.com / kasbah

A 4x4 capacitive touch button grid

github.com / weirdgyn

Switch between two serial NMEA GPS feed based on fix status.

github.com / BeeHive-org

the central hub of BeeHive

openflexure-phase-contrast-illumination

gitlab.com / openflexure

Openflexure Microscope illumination controller

ESP8266-PowerMonitor

github.com / jasiek

ESP8266-based power monitor (pulse counter) with ESPEasy/HomeAssistant compatiblity

gitlab.com / alexander.kutschera

Soil moisture sensor based on ATtiny85

github.com / balthazar-space

Unifying PCB expansion for Balthazar

github.com / BeeHive-org

An H-Bridge driver for peltiers, motors, linear actuators.

Open-Gamma-Detector

github.com / OpenGammaProject

Open hardware for a DIY all-in-one gamma-ray spectrometer using popular scintillation...

16_LED_Channels

github.com / BadenLab

16 LED channels option board for the LED Zappelin' project

AFBR-SiPM-Carrier-Board

github.com / OpenGammaProject

Carrier board for a 6 mm AFBR-S4N66C013 silicon photomultiplier designed for the Open...

github.com / BadenLab

8 LED channels option board for the LED Zappelin' project

NextLevelEdition

github.com / 8BitMixtape

8-BitMixtape NextLevelEdition

PN001_Pop-Neuron_ShenzhenReady

github.com / dusjagr

8BitmixtapeNEO_ShenzhenReady

github.com / 8BitMixtape

The key feature of the new 8Bit Mixtape is the easiness of uploading new codes using ...

gitlab.com / pierros

A RPi4 compatible HAT for astronomy equipment

github.com / BeeHive-org

a breakout board to split a 12V 5A line into several cable connectors

github.com / fossasia

A small USB powered hardware extension for your Android phone or PC that lets you mea...

paged-rom-ram-1mb

gitlab.com / salfter

paged 1 MB SRAM/512K flash

github.com / kitspace

A jellyfish shaped light-following bristle bot

Driverino-Shield

github.com / weirdgyn

Driverino-Shield is an Arduino based simple, low power controller for PM BLDC sensore...

gitlab.com / salfter

RC2014-compatible Z80 CPU board

github.com / BeeHive-org

A training board for users to practice programming

sangaboard_v0.3

gitlab.com / bath_open_instrumentation_group

An Arduino-compatible motor driver board for three unipolar stepper motors. Version 0...

DynamixelShield

github.com / descampsa

Arduino shield to connect Dynamixel servomotors

github.com / dhairyashah1

An ESP32-S2 based general purpose, development PCB board design with both USB Type A ...

tt_opt101_module

github.com / vektorious

Test Tube Photometer opt101 module.

XboxHDMI-Ryzee119

github.com / Ryzee119

100% digital Original Xbox HDMI Concept Board

open-source-rover-control-board

github.com / nasa-jpl

Control board for a 6-wheel rover based on the rovers on Mars!

github.com / gregdavill

2,400 LED Icosahedron (d20) - Controller Board

alpha-spectrometer

github.com / ozel

Low-cost DIY particle detector for radioactivity: Alpha-spectrometer variant

BQ25570_Harvester

github.com / kitspace-forks

TI BQ25570 step-up DC-DC energy harvester and battery charger

bobbycar_breakout

github.com / Jana-Marie

Hoverboard breakout board for Bobbycars

github.com / m3cinc

The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d p...

github.com / drspangle

The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d p...

gitlab.com / LouisLab

The Raspberry Pi based Virtual Reality system (PiVR) is a virtual reality system for ...

github.com / BadenLab

OpenSpritzer, an open hardware pressure ejection system for reliably delivering picol...

github.com / Jana-Marie

Tiny USB to adressable LED adapter. Fits in your USB port :3

KOS01_IdealDiode20A

github.com / InaneCoding

20A 5V-60V Ideal Diode using the LTC4359 controller

github.com / GenericLab

nunchuk_breakout

github.com / Jana-Marie

Nunchuk to hoverboard connector board

github.com / eez-open

BB3 MCU board (Crowd Supply edition)

3-ch-diversity-system

github.com / jharwinbarrozo

3 Channel Automatic FPV Video Selector Diversity System

github.com / LibreSolar

MPPT solar charge controller with dual USB ports

ice40_eink_controller

github.com / julbouln

ice40 FPGA eink controller

github.com / less-smog

Open Hardware, Wi-Fi Air Pollution Sensor

antenna-analyser

github.com / jasiek

0-40MHz amateur radio antenna analyser. Uses AD9850, Arduino Pro Mini and a 2.2 inch ...

github.com / kitspace-forks

The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff.

github.com / amchagas

3D-printable microscope for diagnostics and scientific experiments

gitlab.com / xengi

FTDI helper for the future. With FT230X, blinky lights and USB-C!

github.com / JarrettR

USBvil is a low-cost PIC dev board that fits into a common flashdrive case.

github.com / eez-open

BB3 DCP405 module

github.com / Jana-Marie

CH330 breakout board

github.com / UDXS

A tiny Arduino dev board that can fit anywhere!

github.com / balthazar-space

12_24_boost_converter

github.com / BeeHive-org

a 12V to 24V boost converter

github.com / BadenLab

A custom board to implement LED Zappelin', an opensource LED controller for 2-photon ...

github.com / borgel

A communicative electronic conference badge in the shape of a dragonfly

voltage-amplifier

github.com / Sussex-Neuroscience

A voltage amplifier compatible with Arduino DUE

github.com / vektorious

Test Tube Photometer Arduino Nano HAT - Version 1

github.com / kitspace-forks

The Arduino Uno is a microcontroller board based on the ATmega328.

github.com / Jana-Marie

A TS100 USB-PD replacement PCB.

github.com / Ryzee119

Neotron-32-Hardware

github.com / Neotron-Compute

A simple 32K ARM-powered home computer

github.com / jpralves

CSEduino, a very low cost DIY Arduino like board

gitlab.com / salfter

video card built around the Yamaha V9958

github.com / mlab-modules

USB device to I²C master adapter with Linux kernel support

ofm_cc_illumination_single

gitlab.com / openflexure

Constant current illumination board for the Openflexure Microscope.

Xassette-Asterisk

github.com / SdtElectronics

Evaluation board for AllWinner's RISC-V 64 SoC F133/D1s

OtterScreenAdapter

github.com / Jana-Marie

DisplayPort to Ipad 3/4 panel adapter

github.com / kammce

Open source educational microcontroller development board with LPC4078 MCU, buttons, ...

F800GS_LED_Turn_Signal_Single_Row

gitlab.com / drid

LED retrofit for F800GS/F650GS 2008 large turn Signals

github.com / kitspace-forks

comma neo research platform

hum_temp_sensor

github.com / BeeHive-org

A board porting temperature and humidity sensort

github.com / gregdavill

2,400 LED Icosahedron (d20) - LED Board (r0.3)

ShenzhenPostcard

github.com / ollyoid

esp8266-breakout

github.com / mattvenn

ESP8266-12 breakout board

github.com / intergalaktik

RS485 LED strip sender/receiver

github.com / GaudiLabs

ChaosLooper Synthesizer

dropbot-40-channel-HV-switching-board.kicad

github.com / sci-bots

DropBot v3 40-channel high-voltage switching board

github.com / intajay

Arduino compatible AVR Development Board

balthazarKeyboard3

github.com / balthazar-space

github.com / eez-open

BB3 AUX-PS board (Crowd Supply edition)

F800GS_LED_Turn_Signal_Dual_Row

gitlab.com / drid

LED retrofit for F800GS/F650GS 2008 large turn Signals

github.com / Ryzee119

Add modern xinput USB support to your Original Xbox :tv: :video_game:

github.com / kasbah

Triangle shaped LED tree construction kit

github.com / carrotIndustries

A programmable digital watch that re-uses case and LCD panel of the Casio® F-91W

github.com / OpenGammaProject

Hardware for quick and easy prototyping with your silicon photomultiplier and even bu...

microNoise_SZ-Ready

github.com / sgmk

github.com / pcbsz

Simple LM3886TF amplifier.

github.com / vektorious

Test Tube Photometer Arduino Nano HAT - Version 2

github.com / BeeHive-org

an array of 8 individually addresseable NPN transistors

github.com / Jana-Marie

stm32f072 dev board with arduino nano alike pinout

d20-tri-panel-4x1

github.com / gregdavill

2,400 LED Icosahedron (d20) - LED Board 4x1 Panel (r0.3)

github.com / squaresolid

A simple circuit based on CD4093 that sensitive to MOISTURE and organic matter throug...

github.com / 8BitMixtape

A minimal barebone PCB for making your own 8Bit Mixtape and custom interface

github.com / bschwind

ugame-10-hardware

github.com / python-ugame

The design files for the µGame 10 handheld console.

github.com / taylorconor

A fully-functional open source and open hardware mechanical USB computer keyboard wit...

grove_adaptor_panel

github.com / BeeHive-org

a panel of adaptor boards to connect JST-XH plugs to Grove system plugs

github.com / kb-consulting

96well Light Plate Apparatus (LPA) PCB, derived from original Tabor Lab designs

github.com / eez-open

github.com / pcbsz

Simple LM386 amplifier

github.com / Ryzee119

usb64 - A project developed to use USB controllers on the Nintendo 64 console :tv: :v...

nunchuk_breakout_panel

github.com / Jana-Marie

Nunchuk to hoverboard connector board panel

github.com / pcbsz

Simple Atari punk synth.

github.com / kitspace

The Kitspace PCB ruler

github.com / BadenLab

A hardware implementation of the Izhikevich model of a spiking neuron

Signal-Detector

github.com / dvdfreitag

A low-cost RF power detector based on the AD8319

satnogs-diplexer

gogs.zenerdio.de / sebastian

A 2m/70cm diplexer for SatNOGS groundstations

github.com / BeeHive-org

a board to house different types of gas_sensors

github.com / eulerlab

A board for fast switching leds on/off, part of the Open source visual stimulator pro...

github.com / kitspace-forks

Simple low powered FM radio transmitter based on a MAX2606

8BitmixtapeNEO_BerlinerSchule_SZ-RDY

github.com / 8BitMixtape

The key feature of the new 8Bit Mixtape is the easiness of uploading new codes using ...

open-source-rover-shield

github.com / nasa-jpl

Arduino shield for a 6-wheel rover based on the rovers on Mars!

ESPTINY86_MixtapePCB

github.com / 8BitMixtape

ESPTINY86 – WiFi 32Bit Mixtape AVAILABLE NOW!!! Make sure you get this first edition!...

ESPTINY86_Stompbox

github.com / dusjagr

Affordable Open Source Audio Experimentation Device by Budi Prakosa et al

github.com / nerdyscout

Plant Irrigation System with NodeMCU_ESP8266

openflexure-simple-illumination

gitlab.com / openflexure

Simple illumination for the OpenFlexure microscope. This is simply a mounted LED and ...

github.com / eulerlab

Board with solid state relays to open/close an led power line.