infidel
The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d printers. rev1A has revised tracing, GND and reduced vias.
Buy Parts
Adjust quantity:%
| References | Qty | Description | Mouser |
|---|---|---|---|
| R1 | 1 | 1k Resistor R0402 | 667-ERA-2VEB1001X |
| R5 | 1 | 4k7 Resistor R0402 | 667-ERA-2VEB4701X |
| R3 | 1 | 9k1 Resistor R0402 | 667-ERJ-2RHD9101X |
| C1 C2 | 2 | 10uF Capacitor C0402 | 81-GRM155R60J106ME7D |
| R4 | 1 | 18k Resistor R0402 | 667-ERA-2AEB183X |
| R2 | 1 | 36k Resistor R0402 | 667-ERA-2ARB363X |
| LED1 | 1 | LED LEDC1608X35N_FLAT-Y | 604-AA1608SURSK |
infidel
A modified version of an inline filament diameter electronic circuitry This version has been somewhat rewired with fewer vias and all GND signals are connected. Geometric placement of the components has been maintained with the original version https://kitspace.org/boards/github.com/drspangle/infidel-sensor/